Description

Especificaciones
DPA 4018VL-B-SL1 Dynamic microphoneEspecificaciones
Patrón DireccionalSupercardioide
Principle of operationGradiente de presión (diferencial)
Tipo de CaptaciónPre-polarized condenser
Frecuencia(s) de Respuesta20 Hz - 20 Khz
Effective frequency range ±2 dB, at 12 cm (4.7 in)40 Hz - 16 kHz with 3 dB soft boost at 12 kHz
Sensitivity, nominal, ±2 dB at 1 kHz5 mV/Pa; -46 dB re. 1 V/Pa 2 mV/Pa; -54 dB re. 1 V/Pa with Adapter for wireless
Nivel de ruido Equivalente, Ponderado-ATyp. 19 dB(A) re. 20 µPa (max. 21 dB(A))
Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak
Alcance DinámicoTyp. 120 dBMax. SPL, THD 10%160 dB SPL peak
Rated output impedance100 Ω (no balanceado)
Minimum load impedance1 kΩ
Cable drive capability100 m (328 ft)Output balance principleImpedance balancing with Active DriveCommon mode rejection ratio (CMRR)> 50 dB at 1 kHz
Power supply (for full performance)P48 (Phantom Power)
Consumo de CorrienteMax 2.0 mA
Conector(es)XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color(es)matte black
Peso309 g (10.9 oz)
Microphone diameter52 mm (2.05 in)
Capsule diameter19 mm (0.75 in)
Microphone length205 mm (8.1 in)
Maximum output voltage, RMS8 V
Polaridad+V at pin 2 for positive sound pressure
Rango de Temperaturas-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)Up to 90%